0.10.0 is Atmosphère's twenty-third official release.

fusee-primary was last updated in: 0.10.0.

With thanks to the @switchbrew team, Atmosphère 0.10.0 is bundled with hbl 2.2, and hbmenu 3.1.1.

Please note: Atmosphère 0.10.0 is currently in pre-release.
If any bugs are reported while Atmosphère is in pre-release, they will be fixed and the build will be updated.
0.10.0 will transition to release after a short amount of time has passed without pressing bug reports.
The following was changed since the last release:

Support was added for 9.1.0
Please note: The temporary hid-mitm added in Atmosphere 0.9.x will be removed in Atmosphere 0.10.1.
Please ensure your homebrew is updated.
The Stratosphere rewrite was completed.
libstratosphere was rewritten as part of Stratosphere's refactor.
Code responsible for providing and managing IPC services was greatly improved.
The new code is significantly more accurate (it is bug-for-bug compatible with Nintendo's code), and significantly faster.
ams.mitm was rewritten as part of Stratosphere's refactor.
Saves redirected to the SD card are now separated for sysmmc vs emummc.
Please note: If you find any bugs, please report them so they can be fixed.
Thanks to the rewrite, Atmosphere now uses significantly less memory.
Roughly 10 additional megabytes are now available for custom system modules to use.
This means you can potentially run more custom system modules simultaneously.
If system modules are incompatible, please ask their authors to reduce their memory footprints.
Atmosphere's configuration layout has had major changes.
Configuration now lives inside /atmosphere/config/.
Atmosphere code now knows what default values should be, and includes them in code.
It is no longer an error if configuration inis are not present.
Correspondingly, Atmosphere no longer distributes default configuration inis.
Templates are provided in /atmosphere/config_templates.
loader.ini was renamed to override_config.ini.
This fixes the longstanding problem that atmosphere updates overwrote user configuration when extracted.
Atmosphere's process override layout was changed.
Atmosphere now uses the /atmosphere/contents directory, instead of /atmosphere/titles.
This goes along with a refactoring to remove all reference to "title id" from code, as Nintendo does not use the term.
To make this transition easier, a temporary functionality has been added that migrates folders to the new directory.
When booting into 0.10.0, Atmosphere will rename /atmosphere/titles/ to /atmosphere/contents/.
This functionality may or may not be removed in some future update.
This should solve any transition difficulties for the typical user.
Please make sure that any future mods you install extract to the correct directory.
Support for configuring override keys for hbl was improved.
The key used to override applications versus a specific program can now be different.
The key to override a specific program can be managed via override_key.
The key to override any app can be managed via override_any_app_key.
Default override behavior was changed.
By default, atmosphere will now override the album applet with hbl unless R is held.
By default, atmosphere will now override any application with hbl only if R is held.
The default amount of applet memory reserved has been slightly increased.
This allows the profile selector applet to work by default in applet mode.
The way process override status is captured was changed.
Process override keys are now captured exactly once, when the process is created.
This fixes the longstanding issue where letting go of the override button partway into the process launch could cause problems.
The Mitm API was changed to pass around override status.
Mitm services now know what keys were held when the client was created, as well as whether the client is HBL/should override contents.
An extension was added to pm:info to allow querying a process's override status.
Thanks to process override capture improvements, hbl html behavior has been greatly improved.
Web applets launched by hbl will now always see the /atmosphere/hbl_html filesystem
Support was added to exosphere for enabling usermode access to the PMU registers.
This can be controlled via exosphere!enable_user_pmu_access in BCT.ini.
An enormous number of minor bugs were fixed.
dmnt's cheat VM had a fix for an inversion in opcode behavior.
An issue was fixed in fs.mitm's management of domain object IDs that could lead to system corruption in rare cases.
The Mitm API no longer silently fails when attempting to handle commands passing C descriptors.
On previous atmosphere versions, certain commands to FS would silently fail due to this...
No users reported any visible errors, but it was definitely a problem behind the scenes.
These commands are now handled correctly.
Atmosphere can now display a fatal error screen significantly earlier in the boot process, if things go wrong early on.
The temporary hid mitm will no longer sometimes cause games to fail to detect input.
Mitm Domain object ID management no longer desynchronizes from the host process.
An issue was fixed that could cause service acquisition to hang forever if certain sm commands were called in a precise order.
An off-by-one was fixed that could cause memory corruption in server memory management.
... and too many more bugs fixed to reasonably list them all
General system stability improvements to enhance the user's experience.
For information on the featureset supported by 0.10.0, please see the official release notes.

0.10.1 is Atmosphère's twenty-fourth official release.

fusee-primary was last updated in: 0.10.0.

With thanks to the @switchbrew team, Atmosphère 0.10.1 is bundled with hbl 2.3, and hbmenu 3.2.0.

The following was changed since the last release:

A bug was fixed that caused memory reallocation to the system pool to work improperly on firmware 5.0.0 and above.

Atmosphere was always trying to deallocate memory away from the applet pool and towards the system pool.
The intent of this is to facilitate running more custom sysmodules/atmosphere binaries.
However, while memory was always successfully taken away from the applet pool, on 5.0.0+ granting it to the system pool did not work for technical reasons.
If you are interested in the technical details, talk to SciresM.
This has now been fixed by adding new kernel patches, and memory is correctly granted to the system pool as intended.
Atmosphere's library system has been overhauled:

libstratosphere's repository has been rebranded, more generally, to "Atmosphere-libs".
In addition to libstratosphere, a new general library for not-stratosphere-specific code has been added.
This is currently named libvapours.
In the future, kernel functionality will be available as libmesosphere.
The build system for stratosphere system modules has been similarly overhauled.
The boot system module is now loaded into non-secure memory.

This helps somewhat to prevent fragmentation of the system memory heap.
A number of other bugs were fixed, including:

A bug was fixed that could cause memory corruption when redirecting certain Romfs content.
A bug was fixed that could cause an infinite loop when redirecting certain Romfs content.
A bug was fixed that could cause certain NROs to fail to load.
This caused the latest version of Super Smash Bros to display "An error has occurred" on launch.
A bug was fixed that caused input/output array sizes for certain circumstances to be calculated incorrectly.
This caused cheats to fail to function properly.
C++ exception code is now more thoroughly removed from stratosphere executables.
This saves a minor amount of memory.
A number of minor logic inversions were fixed in libstratosphere.
These did not affect any code currently used by released Atmosphere binaries.
Please note: Because this update is releasing so soon after 0.10.0, the removal of the temporary hid-mitm has been postponed to 0.10.2.

Please ensure your homebrew is updated.
Random number generation now uses TinyMT instead of XorShift.

General system stability improvements to enhance the user's experience.

0.10.2 is Atmosphère's twenty-fifth official release.

fusee-primary was last updated in: 0.10.2.

With thanks to the @switchbrew team, Atmosphère 0.10.2 is bundled with hbl 2.3, and hbmenu 3.2.0.

The following was changed since the last release:

hbl configuration was made more flexible.
Up to eight specific program ids can now be specified to have their own override keys.
This allows designating both the album applet and a specific game as hbl by default as desired.
Configuration targeting a specific program is now mutually exclusive with override-any-app for that program.
This fixes unintuitive behavior when override key differed for an application specific program.
Loader's external content fileystem support was fixed (thanks @misson20000!).
KernelLdr was reimplemented.
This is the first step towards developing mesosphere, Atmosphere's planned reimplementation of the Switch's Kernel.
The typical user won't notice anything different, as there are no extensions, but a lot of groundwork was laid for future development.
Improvements were made to the way Atmosphere's buildsystem detects source code files.
This significantly reduces compilation time (saving >30 seconds) on the machine that builds official releases.
Certain device code was cleaned up and made more correct in fusee/sept/exosphere (thanks @hexkyz!).
A number of changes were made to the way fs.mitm builds images when providing a layeredfs romfs.
Some games (Resident Evil 6, Football Manager 2020 Touch, possibly others) have enormous numbers of files.
Attempting to create a layeredfs mod for these games actually caused fs.mitm to run out of memory, causing a fatal error.
The code that creates these images was changed to be significantly more memory efficient.
However, these changes also cause a significant slowdown in the romfs building code (~2-5x).
This introduced a noticeable stutter when launching a game, because the UI thread would block on the romfs creation.
To solve this, fs.mitm now lazily initializes the image in a background thread.
This fixes stutter issues, however some games may be slightly slower (~1-2s in the worst cases) to transition from the "loading" GIF to gameplay now.
Please note: the slowdown is not noticeable in the common case where games don't have tons of files (typical is ~0.1-0.2 seconds).
Once the image has been built, there is no further speed penalty at runtime -- only when the game is launched.
A number of other bugs were fixed, including:
Several minor logic inversions that could have caused fatal errors when modding games.
Atmosphere's new-ipc code did not handle "automatic" recvlist buffers correctly, so some non-libnx homebrew could crash.
fs.mitm now correctly mitms sdb, which makes redirection of certain system data archives work again.
In 0.10.0/0.10.1, changing the system font/language did not work correctly due to this.
A bug was fixed in process cleanup that caused the system to hang on < 5.0.0.
The temporary hid-mitm added in Atmosphere 0.9.0 was disabled by default.
Please ensure your homebrew is updated.
For now, users may re-enable this mitm by use of a custom setting (atmosphere!enable_deprecated_hid_mitm) to ease the transition process some.
As usual, edit the atmosphere section of /atmosphere/config/system_settings.ini if you wish to do so.
Please note: support for this setting may be removed to save memory in a future atmosphere release.
General system stability improvements to enhance the user's experience.

Support was added for 9.2.0.
Support was added for redirecting manual html content for games.
This works like normal layeredfs, replacing content placed in /atmosphere/contents//manual_html/.
This allows for game mods/translations to provide custom manual content, if they so choose.
A number of improvements were made to Atmosphere's memory usage, including:
fatal now uses STB instead of freetype for rendering.
This saves around 1 MB of memory, and makes our fatal substantially leaner than Nintendo's.
sm no longer wastes 2 MiB unnecessarily.
fusee/sept's sdmmc access now better matches official behavior.
This improves compatibility with some SD cards.
ro has been updated to reflect changes made in 9.1.0.
The temporary auto-migration added in 0.10.0 has been removed, since the transitionary period is well over.
General system stability improvements to enhance the user's experience.

0.10.4 is Atmosphère's twenty-seventh official release.

fusee-primary was last updated in: 0.10.4.

With thanks to the @switchbrew team, Atmosphère 0.10.4 is bundled with hbl 2.3, and hbmenu 3.2.0.

The following was changed since the last release:

With major thanks to @Adubbz for his work, the NCM system module has now been re-implemented.
This was a major stepping stone towards the goal of having implementations of everything in the Switch's package1/package2 firmware.
This also lays the groundwork for libstratosphere providing bindings for changing the installed version of the Switch's OS.
Please Note: The NCM implementation will initially be opt-in.
The Atmosphere team is confident in our NCM implementation (and we have tested it on every firmware version).
That said, this is our first system module that manages NAND savegames -- and caution is a habit.
We do not anticipate any issues that didn't come up in testing, so this is just our being particularly careful.
Users interested in opting in to using our implementation should set stratosphere!ncm_enabled = 1 in BCT.ini.
In the unlikely event that any issues are encountered, please report them to @SciresM.
The NCM implementation will stop being opt-in in a future update, after thorough testing has been done in practice.
A bug was fixed in emummc that caused Nintendo path to be corrupted on 1.0.0.
This manifested as the emummc folder being created inside the virtual NAND instead of the SD card.
It's unlikely there are any negative consequences to this in practice.
If you want to be truly sure, you can re-clone sysmmc before updating a 1.0.0 emummc to latest firmware.
Stratosphere system modules now use new Nintendo-style FS bindings instead of stdio.
This saves a modest amount of memory due to leaner code, and greatly increases the accuracy of several components.
These bindings will make it easier for other system modules using libstratosphere to interact with the filesystem.
This also lays the groundwork for changes necessary to support per-emummc Atmosphere folders in a future update.
Atmosphere's fatal error context now dumps 0x100 of TLS.
This will make it much easier to fix bugs when an error report is dumped for whatever caused the crash.
General system stability improvements to enhance the user's experience.

Please note: Atmosphère 0.11.0 is currently in pre-release.

If any bugs are reported while Atmosphère is in pre-release, they will be fixed and the build will be updated.
0.11.0 will transition to release after a short amount of time has passed without pressing bug reports.
The following was changed since the last release:

Support was added for 10.0.0.
Exosphere has been updated to reflect the new key import semantics in 10.0.0.
kernel_ldr now implements physical ASLR for the kernel's backing pages.
Loader, NCM, and PM have been updated to reflect the changes Nintendo made in 10.0.0.
Creport was updated to use the new pgl service to terminate processes instead of ns:dev.
A reimplementation of the erpt (error reports) system module was added.
In previous versions of Atmosphere, a majority of error reports were prevented via a combination of custom creport, fatal, and stubbed eclct.
However, error reports were still generated via some system actions.
Most notably, any time the error applet appeared, an error report was generated.
By default, atmosphere disabled the uploading of error reports, but going online in OFW after an error report occurred in Atmosphere could lead to undesirable telemetry.
Atmosphere's erpt reimplementation allows the system to interact with existing error reports as expected.
However, all new error reports are instead saved to the sd card (/atmosphere/erpt_reports), and are not committed to the system savegame.
Users curious about what kind of telemetry is being prevented can view the reports as they're generated in there.
Reports are saved as msgpack (as this is what Nintendo uses).
Please note, not all telemetry is disabled. Play reports and System reports will continue to function unmodified.
With atmosphere's erpt implementation, homebrew can now use the native error applet to display errors without worrying about generating undesirable telemetry.
libstratosphere and libvapours received a number of improvements.
With thanks to @Adubbz for his work, the NCM namespace now has client code.
This lays the groundwork for first-class system update/downgrade homebrew support in the near future.
In particular, code implementing the os namespace is significantly more accurate.
In addition, Nintendo's allocators were implemented, allowing for identical memory efficiency versus Nintendo's implementations.
General system stability improvements to enhance the user's experience.

см. на гитхаб

0.19.4 is Atmosphère's fiftieth official release.

fusee-primary was last updated in: 0.19.3.

With thanks to the @switchbrew team, Atmosphère 0.19.4 is bundled with hbl 2.4.1, and hbmenu 3.4.0.

The following was changed since the last release:

Support was added for 12.0.3.
A number of minor issues were fixed, including:
An issue was fixed that could cause heap memory corruption when allocation was highly contended.
An issue was fixed that could cause sleep to fail under certain conditions.
An issue was fixed that could cause a scheduler slow path to be taken more often than necessary.
General system stability improvements to enhance the user's experience.